Bones III for 1/72 scale

Since starting Cheap Fantasy Minis a few years ago, I've gone through 3 Kickstarters expanding Reaper Miniatures excellent Bones line of cheap plastic minis. While they are standard-sized gaming minis, I've found that many of them are readily adaptable to 1/72 scale, the preferred scale of this blog. For this most recent Kickstarter, I skipped the core set and went for the Stoneskull and the Graveyard expansion, plus a few extra add-ons. The expansions had a lot more small minis and terrain pieces, which I find are best for adapting to 1/72.

My sets arrived last week, so I've taken some comparison shots of the more interesting minis.

The Stoneskull expansion includes six new kobold sculpts, four of which are shown here. I was worried that they might be too large, like the kobold leaders from the second Bones Kickstarter, but they look great. If anything they are a tick smaller and more delicately featured than the original Bones kobolds, making them even better suited for 1/72 gaming. Shown for comparison are one of the original Bones kobolds, plus an unpainted kobold from the Wrath of Ashardalon game.

Other small critters from the Stoneskull set include the gremlins on the left and the "veggie-pygmies" on the right. A Caesar Miniatures goblin is shown for comparison. I'm not sure what a veggie-pygmy is, or what use I'd have for them, but they're just a little under human-sized even in 1/72 scale.

"Stitch golems" on the left; "grave minions" from the Graveyard set on the right. The stitch golems are a little chunky-looking but just about the size of Sven. Similarly, the graveyard minions have somewhat large heads and hands but are otherwise human-sized. As mockeries of human form, they look just fine!

Plant monsters: A "saproling," and a couple of "death star lillies." The saproling is just a bit bigger than Sven, which is what I'd expect from a modestly-sized tree monster. The lillies look big enough for Sven to fit inside, if he gets too close.

Getting a little bigger. Here we have a naga from the Stoneskull set and a "carrion worm" from the Graveyard set. These would be just a little bigger than Reaper-sized humans but look suitably monstrous next to Sven.

Even bigger: a flesh golem, minotaur, and larger stitch golem from Stoneskull, plus one of the ogres from the core set. I always like when large minis are looking down, like the minotaur is doing here. It makes it look like they're sizing up smaller adversaries like Sven.

Finally, the biggest: an absolutely titanic iron golem, and a clear plastic air elemental. The latter should make a fine companion to the fire and water elementals from the previous Kickstarters.

I expect that soon after Reaper finishes fulfilling the current Kickstarter, the Kickstarter for Bones IV: I Can't Believe We're Doing Another One will launch soon after. I'm not sure I have the scratch to back this one (depends on how well I do on my sales page!), but I'll definitely keep an eye on it and live-blog updates. In the meantime, check out this gallery for a preview.

Splintered Light and Rebel Miniatures sales

I've often mentioned that a number of 15mm metal fantasy mini companies have potential as 1/72 figures. Splintered Light Miniatures and Rebel Miniatures are two such manufacturers. They are both having sales until the end of the year; it's not too late to take advantage of them! For Rebel Miniatures, just enter coupon code Rebel2014 when you checkout for 20% off your order. Likewise, for Splintered Light, just enter code xmas2014 for 20% off. Splintered Light is also offering 30% certain items in their store.

I'll feature some of these figures in better detail in future posts, but I thought I'd show off what I bought to show the potential of some of these figures.

A Large Wolfhound, Dire Hyena and Dire Wolf from Splintered Light. They all look just fine next to Sven. The hyena will make a fine hellhound or direwolf.

Heroes of Shadow, also from Splintered Light. They're about the size of some of my halfing minis, such as Lidda from the One Inch Guild.

A Splintered Light hyenaman/gnoll and kobold are on the left. The rest are from Rebel Minis: a Deep One, two Wolven, and two Monkey Boys. The kobold is sold as 20mm, but is a little small for my taste. Most of these I think are a bit on the small side, but the Deep One works as a small fishman, and the Wolven are actually perfect as 1/72 werewolves (the "15mm Werewolves" that Rebel sells are probably too small for 1/72, so don't mix them up!).

Many of these figures I got as free samples on request. Both Rebel and Splintered Light are great companies that will happily provide such samples; just leave a note with your order. I'll definitely be making future orders thanks to seeing some of these figures in person.

Metal minis are a bit more expensive than plastic, and though I understand that these are delicate figures, I wish there were cheaper shipping options at both companies. Still, they often have figures that can't be found or made in plastic, so when they offer sales like these, it's a great time to stock up.

Replacements! (Castle Ravenloft monsters in 1/72 scale)

So this is the rather involved and curious project I'm undertaking. I recently thought to myself, why not buy all the D&D Adventure System board games, replace the minis with 1/72 equivalents, and sell the rest on the secondary market? This sort of thing only begins to make sense if you are already collecting 1/72 fantasy minis (and who doesn't?). A few reasons one might be interested in this: you do what I did and buy the full game, keeping the minis you like and selling the rest. Or you can buy all the game pieces separately at places like Auggie's or Hoard o Bits, and get cheaper minis for the game as shown here. Or maybe you just like to see what minis can be found in scale. To be honest, this last point is also part of my motivation: it's a bit of a challenge to see if I can recreate these game minis in my scale of choice, and gives me some direction when considering what minis to seek out next.

This will be first of a series of posts. I'll start with the monsters from Castle Ravenloft, the first D&D Adventure System game. I'm excluding villains for a later post. I'm also excluding the rat swarm minis, as they also work for 1/72 scale, so I have no interest in replacing them. These shots include the original mini and their smaller scale replacements for comparison.

Gargoyles. The replacements are Twilight Creation demons.

Ghouls, also from Twilight Creations. You wouldn't think of them as undead, but they have both the pointed ears and the edible hand of the original mini which is a rather unusual coincidence.

Wraiths. These are mods from Caesar Miniatures undead. Read more about these (and the ghouls and gargoyles) here. Arcane Legions has some clear ghost minis, but they're dressed in Chinese armor, so I decided on something more generic.

Skeleton warriors. This one was easy, just Caesar Miniatures undead.

Blazing skeletons. I despaired at ever being able to find something like that in 1/72, but I realized that they were basically skeletons with ranged attacks. So these skeleton archers from Caesar will serve as adequate substitutes. I suppose some clever work with skeletons and Milliput could also work, if I ever have the inclination.

Zombies. The 1/72 guys are mods between Italeri barbarians, Caesar undead, and Twilight Creations zombies. More here.

Giant spiders. The original mini would probably have been just fine as a slightly more giant spider in 1/72. Other alternatives would be the giant spider from the World of Warcraft game (the blue mini), or the toy Halloween spider.

Kobold skirmishers. These are Reaper Bones minis. Clearly these are spears and not the "javelins" the monster card describes, but they are perfectly fine. The original mini is just a little too tall for my taste, but would probably look okay in 1/72.

Wolves. Depending on your taste, the original figure might be just fine in 1/72 scale. The ostensibly 1/72 Iberian wolf from Arcane Legions is not much smaller. I happen to have three of the Reaper Bones dog familiars, so I'll probably use them to replace the three Castle Ravenloft wolves.

I may feature monsters from other games before I undertake villain and hero minis. They're doable, but may take some work. At any rate, I hope this feature will be at least somewhat interesting, and not entirely peculiar or esoteric.

Kobolds completed

I finished painting my kobolds, my most recent project.

Sorry they look a little washed out. They're Reaper Bones, with some modifications (see here for more). They're shown here with Sven the comparison viking and Mullog the comparison goblin. The ones that stand upright look perhaps a little too tall, but all in all they work great for 1/72 fantasy. I'm hoping Reaper releases some of Ben Siens' other kobold sculpts in Bones plastic to round out my cheap kobold army.

Goblins vs. kobolds! Who will emerge the ankle-biting nuisance monster extraordinaire?

Kobolds - work in progress

I probably won't get much more painting until after Easter, but I had a little time to splash some more paint on my kobolds. These are plastic Bones miniatures from Reaper. You can get a pack of six for $3 or less in many places, which is my ideal average cost per mini. They only come with three poses, but the plastic is soft and flexible, so modding and reposing is pretty easy.

These guys aren't quite presentable and have a lot of clumsy splotches I need to paint over (the secret to a great paintjob is in the editing, I've found). Still, I thought I'd share.

These guys all had the same pose originally. Most of these mods involved bent limbs and chopped-off weapons. I also cut off and reposed a couple heads, so not every pose was so flat. Obviously the most radical mod is the sorcerer on the left. I think my attempt to dress him in Milliput arcane robes turned out okay, even if he looks a little lumpy. The totem comes from an Italeri Barbarian figure, which you may have seen before on this blog.

Again, these minis are all the same sculpt. Originally all the shields were raised like the guy on the left. I bent them and pinned them in place in a more usefully defensive pose.

I couldn't think of a way to repose the spears. Reaper claims that you don't need to prime their Bones figures, so since I didn't do any reposing, I tried painting these guys unprimed. The colors looked a little different, but I found the paint actually stuck better to these guys than their primed cousins (which makes me doubt the efficacy of my primer!).

Here's a kobold with Sven the comparison Viking and a goblin from Caesar Miniatures. Even though the Reaper figures are 28mm, they are about the same size as the 1/72 goblins. They are a little chunkier, and their weapons are bigger, but I think they'll look fine at the table.